For full functionality of this site it is necessary to enable JavaScript.

Máy phân tích độ ẩm trong phòng thí nghiệm Finna MCPC

Máy phân tích độ ẩm kết nối với máy tính để phân tích các loại hạt, bột, bột viên, ...

Đo lường độ ẩm của bột, khoai tây chiên, hạt, mảnh vụn, bột viên và các loại thực phẩm khác, hạt nguyên, sản phẩm thịt hạt, hóa chất, cốt liệu, vv

• Hiệu chuẩn hai điểm đơn giản độ lợi và bù được tự động tính toán và lưu trữ khi hai mẫu hàm lượng ẩm đã biết được kiểm tra 

• Hiệu chuẩn nhiều điểm; lên đến 7 mẫu độ ẩm đã biết được kiểm tra để đạt được đường cong hiệu chuẩn điểm trên phạm vi rộng 

• Tốc độ đo 5 giây trở xuống 

• Đo trọng lượng lên đến 200 gam 

• Thử nghiệm mẫu sản phẩm trong phòng thí nghiệm miễn phí và hiệu chuẩn trước MCPC

Thiết bị phòng lab

Đo không tiếp xúc

Phương pháp đo : tần số vô tuyến

Hiển thị : digital

Nguồn điện cung cấp : 220VAC

Chi tiết

Model MCPC: Lab Moisture Analyzer

PC-Based laboratory/production Moisture Analyzer connects through the RS-232 Serial Port. For nuts, granules, powders, pellets, chips or flakes. Complete with:
– MCPC-RS Test Chamber
– Windows PC-Based Software
– Two Sample Cups
– Dial Thermometer
– Standard Block
– RS-232 Cable (10 Feet)
– USB to RS232 Adapter
– Operating Instructions Manual
– 115VAC/60HZ Wall Transformer

Notes: Computer is not included. Minimum Computer Requirements: An IBM compatible Pentium or higher personal computer, Windows 95 or higher, a hard drive with at least 4.5 MB of free disk space, and CD-Rom drive. 115 VAC intended for North & South America + Japan; 220 VAC intended for Australia, Europe and most of Asia.

Product Description

The MCPC Lab Moisture Analyzer is a Windows 7 & 8 compatible, menu-driven system that provides fast, accurate moisture content measurement. The intuitive features simplify the MCPC system proficiency training and the ready-access Help menu provides concise, easy to understand information. The test data is stored on the host PC’s hard drive and is exported directly as a CVS or Excel XLS file. Three user defined, quick-access calibration curve selection buttons are included for faster multi-product testing. The system stores and accesses up to 99 different calibration curves.

Model MCPC Lab Moisture Analyzer Features:

• Non-destructive moisture content measurement of powders, chips, granules, flakes, pellets and other foods, whole nuts, nut meat products, chemicals, aggregates, etc.
• Certified for almonds by the State of California
• Simple two point calibration using a pre-programmed standard curve; gain and offset are automatically calculated and stored when two sample of known moisture content are tested
• Multiple Point Calibration; up to 7 known moisture content samples are tested to achieve a break point calibration curve over a wide range
• Weight measurements up to 200 gm
• Measurement speeds of 5 seconds or less
• Free laboratory product sample testing and MCPC pre-calibration

MCPC Moisture Computer uses weight corrected capacitance measured at radio frequencies (RF) to derive moisture content in five seconds or less. This technique is ideal for measuring moisture because RF completely penetrates non-conductive materials to measure moisture throughout the particle. MCPC tests are completely non-destructive and no sample heating occurs.

Additional Information

Process

Lab

Pin Feature

Pinless

Contact Feature

Non-Contact

Measurement Method

Radio Frequency

Reading Feature

Digital

Voltage

115 VAC, 230 VAC

CATALOG


  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi