AE-MIC AE-1644E 超高电阻仪 (5.00kΩ~1500.0GΩ)

Range: Measuring range:

     100kΩ: 5.00kΩ~150.00kΩ

     1MΩ: 50.0kΩ~1500.0kΩ

     10MΩ: 0.500MΩ~15.000MΩ

     100MΩ: 5.00MΩ~150.00MΩ

     1GΩ: 50.0MΩ~1500.0MΩ

     10GΩ: 0.500GΩ~15.000GΩ

     100GΩ: 5.00GΩ~150.00GΩ

     1TΩ: 50.0GΩ~1500.0GΩ

Measuring Indication Range:

     Indication Range Diviation value measurement ±50.00%

     Absolute value measurement 500 to 15000

Measuring Method: 2 terminal measurement with Contact check

Measuring time:

     Free running: about 20 times/sec to about 3 times/sec.

     External start: FAST 2.5nsec + Delay + Integration time (1msec. to 29mse.)

     SLOW: 2.5nsec + Delay + Integration time (1 to 9 cycle)

     Trimming mode: about 14.4msec + Integration time + (150msec only when the judgement is HI)

Comparator setting range:

      Diviation value measurement: High limit/Low limit 0 to ±50%

      Absolute value measurement: High limit/Low limit 0 to 15000

Measurement delay time: 0msec to 99msec Setting is possible per range

Contact check time:

      Before measurement: Measuring time + 11msec

      After measurement: Measuring time + 6msec

Judgement indication: HI, GO, LO, LCD display, buzzer and external signal output

Control Signal:

     Start signal：start by “L”[0V or short]→ “H”[DC12V or open ]

     Hold signal：Open & “H”[DC12V or open]：Free run, “L”[0V or short]：Hold

     Judgement signal [LO/GO/HI]： open collector output

     Contact error signal[CE]： open collector output ON

     Termination signal [EOC]： open collector output ON

Operation enviroment Temperature：+5℃ to +40℃, Humidity：below 85%

Power Supply: AC85V to 265V, 50 to 60Hz, about20VA

Outer Dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc)

Weight: about 2.5kg

Option:

- GP-IB

- Printer Cable

- Short termination (Zero ohm standard resistor)