Matsusada AMP-10B10 超速高压放大器 (±10kVdc, ±10mA, 7kHz)

Input: 100V ~ 240 VAC ±10%, 50/60 Hz, single phase, 3.5A

Output: 

Voltage: -10 kV to +10 kV 

Current (DC+AC): ±10 mA max and ±30 mApk 1 mS max

Power (max): 100 W

Slew rate: ≥700 V/µs

Frequency Response(-3 dB):

Full scale: DC to 7 kHz

Small bandwidth (10 % of full scale): DC to 25 kHz

Output voltage control: External control voltage Vcon-in = -10 V to +10 V *1 (Input Impedance greater than 10 kΩ)

DC Bias: Front panel 10-turn potentiometer enables setting between -100% and +100% 

Regulation: 

Line : ±0.05% (115 V or 230 V ±10% input change)

Load : 0.05% (10% to 100% load change) 

Ripple:  Less than 0.02% +1 Vp-p 

Stability: 0.016% / Hr typ

DC output voltage display: 3.5-digit digital meter

Output voltage monitor: 10 V to +10 V from front panel BNC terminal (Output impedance 1 kΩ)

Output current monitor: -10 V to +10 V (10 Vpeak) from front panel BNC terminal (Output impedance 1 kΩ Up to 3 kHz bandwidth)

Remote switch ON/OFF: Output ON / OFF with external contact signal (Short : ON, Open : OFF)

Protection: Over current protection with cut off, over voltage protection

Operating Temp.: 0°C to +40°C

Storage Temp.: -20°C to +60°C

Humidity: 20% to 75%RH (no condensation) 

Accessories: 

Input AC cable 2.5 m (1)

Flying lead (open end) for 230 VAC input

Output HV cable flying lead 1.5 m (1) 

Instruction Manual (1)

Detail

Datasheet 



  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化