SIGMA SG-2240A 振动分析仪

Sweep Analyzer Level Flatness 
50Hz - 20kHz <± 0.1 dB.
20Hz - 20kHz <± 0.3 dB.
15Hz - 20kHz <± 0.5 dB.
Sweep 
Lin : 1 to 2000 steps.
Preamp. Input 
Input Mode : ICP (2 channel)
Connector Type : BNC
ICP Power Voltage : 15V
ICP Driving Current : 4mA
Analysis Mode
Vibration Measurement Level Range : 0.01(g) ~100(g)
Current Range : 1.0mA ~ 400.0mA(≥50mW)
Power Amp 
Output : 10mv - 10.00v RMS.
Max power : 8W - at 8 ohms
Standard software Vibration Analyzer Production software 
(PC based Windows® XP, Vista, 7)
Pentium®4, 1.5GHz processor minimum or equivalent. 
(Celeron processors are not recommended)
Interface Bus Personal computer connected to the instrument 
through the Vibration Analyzer Interface Bus. (USB2.0)
Sound Card = 1 PCI Slot
Remote control interfaces 15P D-Type connector I/O signal - Start, Pass, Fail, Test_Run 
Main Power Requirements : AC 220V 50/60Hz 90VA
Operating temperature : +5 to +45℃(+40 to _110F), R, H. <90% non condensing
Dimensions : 300(W) × 72(H) × 255(D) mm 
Weight : Approx. 3Kg


Detail
  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化