INNO M7 光纤熔接机 (Splicing Time: Quick mode: 7s/ Typical: 9s)

SPECIFICATIONS

Model: M7

Dimension: 124H x 144W x 131D (including rubber bumper)

Weight: 1.56kg (including battery) / 1.31kg (without battery)

Number of Fiber: Single

Applicable Fibers: SM(ITU-T G.652&T G.657) / MM(ITU-T G.651) / DS(ITU- T G.653) / NZDS(ITU-T G.655)

Compatible Fiber / Cable: 0.25~3.0 mm / indoor Cable

Cleaved Length: 10-16 mm

Cladding Diameter: 80 μm - 150 μm

Splicing Mode: Max 100 modes, preset 9 modes

Heating Mode: Max 30 modes, preset 3 modes

Typical Splice Loss: 0.03dB(SM) / 0.01dB(MM) / 0.05dB(DS) / 0.05dB(NZDS) / 0.03dB(G.657); Measured by cut-back method relevant to ITU-T standards.

Return Loss: >> 60dB

Lighting: 2 White LEDs

Splicing Time: Quick mode: 7sec (Avg.) / Typical: 9 sec (Avg.)

Estimated Splice Loss: Available

Heating Sleeve Length: 20 mm - 60 mm

Heating Time: 13 sec (45mm, slim 60mm), 15 sec (60mm)

Results Storage: Last 10,000 records

Tention Test: 1.96~2.25N

Operating Condition: Altitude 0~5000m above sea level, Humidity 0~95%RH, -10~50°C, Wind 15m/s

Storage Condition: 0~95% relative humidity, -40~80°C

Display: 0~95% relative humidity, -40~80°C

Fiber View & Magnification: 300X magnifcation with 3 display modes, 400X partial magnifcation

Power Supply: AC Input 100-240V, DC Input 9-14V

No. of Splice / Heating with Battery: Typical usage: 130 cycles / Power save usage: 200 cycles

Operating Methods: Button/Touch Screen

Automatic Calibration: Automatic arc calibration by air pressure and temperature

Electrode Life: 5500 arcs, can be extended by using an electrode grinder

Terminal: USB Type-C

Durability tests (No guarantee the product will not be damaged by these conditions.): 

Shock resistance : Drop from 76cm

Dust resistance : Test in the dust chamber for 8 hours (IP5X)

Water resistance : Dripping water when tilted up to 15° (IPX2)