MICROTEST 6332-3G 阻抗分析仪 (10Hz〜3/5/10 / 20MHz)

Test Frequency : 10Hz ~ 3MHz

Minimum Resolution:7 ppm±100mHz

Basic Accuracy ± 0.08% 

AC Measurement:     

               Test Signal Voltage Level  10mV - 2Vrms

               Voltage Minimum Resolution 1mV

               Accuracy ALC ON：6％ * Voltage ± 2mV

               ALC OFF：10％ * Voltage ± 2mV

               Test Signal Current Level:200µA - 20mArms

               Current Minimum Resolution 10µA

Accuracy:ALC ON：6％ * Current ± 20µA

         ALC OFF：10％ * Current ± 20µA

Test Time  (The fastest) < 3mS

Output Impedance: 25Ω/100Ω, switchable (Nominal value)

Parameters |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε and μr

Measurement Mode:Meter mode, list mode, sweep mode(G series), and equivalent circuit analysis function(GS series)

Calibration:Open Circuit/ Short Circuit/Load Calibration

Measurement Circuit:Series/Parallel

Equivalent Circuit Analysis:Three elements、Four elements     * This function is option 

Multi-steps Mode:50 groups of Multi-steps setting (Each group contains up to 15 steps)

Built-in DC bias voltage:-12 to +12V, 100Hz to 30MHz

PC LINK / CPK:Option

Flash Memory:Built-in flash for setting 100 set documents

USB:LCR setting documents, BMP graphics, Test result data

Interface :I/O Interface Handler

           Serial Interface     USB、RS232

            Parallel Interface     GPIB

Display: 7.0”TFT, 800x480 Color Screen

Temperature: 10℃ ～ 40℃   Humidity: ≦80%

Power Supply:  Voltage 90V ～ 264Vac

                Frequency  47Hz ~ 63Hz

Power Consumption :Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D): 336x147x340 mm

Weight:  3 kg

Standard Accessories

Test Fixture (FX-000C19)

Optional Accessories

Test Fixture (FX-0000C6),Kelvin Clip Leads with BNC Box (F423906A) 

BNC Test Leads (F663001A/B/C), Dielectric Material Test Fixture (FX-0000C7) 

Liquid Dielectric Material Test Fixture(FX-000C20)

Magnetic Material Test Fixture (FX-0000C8) Test Fixture (FX-0000C9)

Bottom Electrode SMD Test Fixture (FX-000C10) 

SMD Tweezers Test Leads (FX-000C11) SMD Test Fixture(FX-000C12)